Open Access Open Access  Restricted Access Subscription Access

ALGORITHM FOR IMPROVING FEEDING RATES OF INDUSTRIAL WELDING ROBOT TA 1400 IN COMBINATION WITH A TURNTABLE FRAME

Ngoc Anh Mai, Xuan Bien Duong

Abstract


An algorithm for improving feeding rates of industrial welding robot TA 1400 of Panasonic with 6 degrees of freedom is presented. The kinematics and dynamics of the robot are calculated on MATLAB software. The proposed algorithm for improving feeding rates is mathematically analyzed and the performance of the system is evaluated in a simulation environment. The simulation results are used for proving the efficiency of the solution. Based on the achieved results, the algorithm can be applied for reducing time and improving the productivity of other industrial robots in the future

Keywords


Robot TA 1400; industrial welding robot; MATLAB program; turntable frame

Full Text:

PDF

References


Morteza Azad, Jan Babič & Michael Mistry, “Effects of the weighting matrix on dynamic manipulability of robots”, Journal of Autonomous Robots, volume 43, pages1867–1879, 2019

M. W. Spong, S. Hutchinson, M. Vidyasagar, “Robot modeling and Control”, New York, USA, 2001

A. Valera, V. Mata, M. Valles, F. Valero, N. Rosillo, F. Benimeli, “Solving the inverse dynamic control for low cost real-time industrial robot control applications,” Robotica, vol 21, 2003, pp. 261-269, doi: 10.1017/S0263574702004769

Michal Kelemen, Ivan Virgala, Tomáš Lipták, Ľubica Miková, Filip Filakovský and Vladimír Bulej, “A Novel Approach for a Inverse Kinematics Solution of a Redundant Manipulator”, Journal of Applied Sciences, 2018, 8, 2229; doi:10.3390/app811222 .

J. Zhao, N. I. Badler, “Inverse kinematics positioning using nonlinear programming for highly articulated figures,” Transactions on Graphics, vol 13, 1994, pp. 313-336, doi: 10.1145/195826.195827

J. Wang, Y. Li, X. Zhao, “Inverse kinematics and control of a 7-dof redundant manipulator based on the closed loop algorithm,” International Journal of Advanced Robotics Systems, vol 7, 2010, pp. 1-10, doi: 10.5772/10495.

H. Pan, B. Fu, L. Chen, J. Feng, “The Inverse Kinematics Solutions of robot manipulators with offset wrist using the offset modification method,” Advances in Automation and Robotics, vol 1, 2011, pp. 655-663, doi: 10.1007/978-3-642-25553-3_81

Y. Feng, W. Yaonan, Y. Yimin, “Inverse kinematics solution for robot manipulator based on Neural Network under joint subspace,” International Journal of Computer and Communications, vol 7, 2012, pp. 459-472, doi: 10.15837/ijccc.2012.3.1387

S. Lian, Y. Han, Y. Wang, Y. Bao, H. Xiao, X. Li, N. Sun, “Accelerating Inverse Kinematics for High-DOF Robots,” Proceedings of the 54th Annual Design Automation Conference, Austin, USA, 2017, doi: 10.1145/3061639.3062223

Y. Aydun, S. Kucuk, “Quaternion based inverse kinematics for industrial robot manipulators with Euler wrist,” ICM 2006 IEEE 3rd International Conference on Mechatronics, 2006, pp. 581-586, doi: 10.1109/ICMECH.2006.252591

M. Kelemen, I. Virgala, T. Liptak, L. Mikova, F. Filakovsky, V. Bulej, “A Novel Approach for an Inverse Kinematics Solution of a Redundant Manipulator,” Applied Sciences, vol 8, 2018, pp. 2-20, doi: 10.3390/app8112229

H. C. Fang, S. K. Ong, A. Y. C. Nee, “Robot path planning optimization for welding complex joints” International Journal of Advanced Manufacturing Technology, vol 90, 2017, pp. 3829-3839, doi: 10.1007/s00170-016-9684-z

T. Lau, O. Stefan, K. Sherif, W. Steiner, “Inverse dynamics of an industrial robot using motion constrains,” 20th International Conference on Research and Education in Mechatronics (REM), Wels, Austria, 2019, doi: 10.1109/REM.2019.87441

M. J. Mahmoodabadi, A. Ziaei, “Inverse dynamics based optimal fuzzy controller for a robot manipulator via particle swarm optimization,” Journal of Robotics, vol 19, 2019, pp. 1-10, doi: https://doi.org/10.1155/2019/5052185

A. Olabi, R. Bearee, O. Gibaru, M. Damak, “Feed rate planning for machining with industrial six-axis robots”, Control Engineering Practice, Elsevier, vol 18, 2010, pp. 471-482, doi: f0.1016/j.conengprac.2010.01.004

Seungkil S., T. Kim, S. E. Sarma, A. H. Slocum “A hybrid 5-axis CNC milling machine,” in Journal of Precision Engineering 33(4), 2009, pp.430-446, DOI: 10.1016/j.precisioneng.2008.12.001




DOI: https://doi.org/10.15625/1813-9663/36/3/14968 Display counter: Abstract : 70 views. PDF : 29 views.

Oktrik

Journal of Computer Science and Cybernetics ISSN: 1813-9663

Published by Vietnam Academy of Science and Technology